Fitting CTI to Factory 1 & 2 Piece Aluminum Wheels

© Copyright 2000 - 2006 Chuck Kopelson 06/12/2006
Updated July 26, 2007

The Cepek CTI disconnect can be too tall to fit under the factory aluminum cover in certain circumstances. There are a few ways to fix the problem. You can use a combination of these to achieve the correct measure.

Machine material out of the center of the cover using a lathe, milling machine or a dremel tool

Machine or file material from the top of the fitting.

Machine or file material to reduce the height of the threads going into the hub. Don't cut too much of the thread or you won't be able to screw the fitting into the hub. These are tapered threads.

CTI in Factory One Piece Wheel

Machine material from the center cap

Machine the threads